How to Clean Shin Guards and Stop the Smell
Your custom shin guards are a statement, not just protection. Keep them looking sharp and working hard with our guide on sizing, cleaning, and storage.

Photo: Barbara Olsen / Pexels
Your custom-printed gear isn't just about protection; it's you, out there on the pitch. Your Shinster Elite Shield guards are built tough and designed to show off your personal style. To keep them going strong, keep that awesome custom print vibrant, and maintain the strength of their 4 mm polypropylene shell, you need to take care of them. They're made for the rough-and-tumble of football, but how long they last really depends on how you look after them. This guide will walk you through everything, from getting the right fit to meticulous cleaning and smart storage, so your investment keeps performing and impressing.
First Things First: Getting the Right Size for Max Protection
Before we even talk about cleaning, the most important thing is making sure your shin guards fit perfectly. A guard that's too big or too small won't just be uncomfortable; it'll also compromise your protection. Shinster offers two carefully designed sizes, each made to cover your critical shin bone area effectively, all while staying super lightweight at under 100 g per pad. This low weight means less distraction and less fatigue during your game.
FIFA Law 4 says that shin guards have to be completely covered by your socks, but it doesn't specify a minimum size or thickness. This gives you the freedom to pick guards that suit your needs and comfort. But 'freedom' doesn't mean you can just wear anything. The guard still has to properly protect your shin. Here’s how to pick the right Shinster Elite Shield for you:
How to Measure Your Shin
To get the most accurate fit, measure the length of your shin bone from just below your knee cap down to the top of your ankle. This measurement is your main guide. Remember, your guard shouldn't extend into the bend of your knee or get in the way of your ankle's movement.
Shinster Size Guide
| Player Height | Recommended Size | Shell Dimensions (Approx.) | Key Considerations |
|---|---|---|---|
| Under 160 cm | Size S | 8 cm width, shorter shell | Perfect for younger players or adults with shorter shins. Focuses on core shin protection without feeling bulky. |
| 160 cm to 165 cm+ | Size L | 19 cm tall, 8.5 cm wide | Great for most adult players. Gives you extensive coverage for most of your shin bone. |
Common Sizing Mistakes to Avoid
- Too Large: Guards that are too long can dig into your knee or ankle, making you uncomfortable and restricting your movement. They might also poke out from the top or bottom of your socks, which is against Law 4.
- Too Small: Guards that are too short leave big parts of your shin exposed, seriously reducing how much they protect you. This is super dangerous given how hard impacts can be in football.
- Ignoring Comfort: Protection is key, but comfort is huge for how well you play. Your guard should feel secure but not tight. Try them on with your regular football socks to make sure they fit well.
The Must-Do: Cleaning Your Guards for Longevity and Hygiene
Keeping your shin guards, especially the EVA foam backing, in good shape is super important. This foam is made to spread out impact force, which can be massive – a senior football shot can fly off the boot at 90-110 km/h. To keep your guard working, hygienic, and your custom print looking sharp, you have to clean them by hand. Machine washing or using a dishwasher is a definite no-no. The high heat, harsh detergents, and aggressive scrubbing in these machines will permanently wreck the materials, warp the polypropylene shell, and destroy your unique photo print.
Here’s a step-by-step guide for effective manual cleaning:
- First Wipe-Down: Right after you use them, grab a soft cloth dampened with lukewarm water. The water temperature is crucial; it absolutely can't be over 30°C. Gently wipe down the entire outer shell of your guard to get rid of loose dirt, grass, and surface grime. This stops dirt from drying on and becoming a pain to remove.
- Tackling Stubborn Stains: If you're dealing with heavy mud, grass stains, or other tough marks, put a tiny bit of mild, non-abrasive soap (like a gentle hand soap or dish soap) on your damp cloth. Gently rub the dirty areas. Stay away from harsh chemical cleaners or abrasive sponges, as these can scratch your print or damage the polypropylene.
- Thorough Rinse: Once they're clean, gently rinse your guards under cool, running water to get rid of all the soap residue. Make sure no soap is left on the surface or in any crevices, because residue can attract dirt or irritate your skin.
- Initial Drying: Immediately after rinsing, use a soft, clean towel to wipe your guards completely dry. This step is vital for getting rid of excess moisture and getting them ready for air drying.
The Crucial Next Step: Proper Drying and Odour Control
One of the main reasons equipment smells bad is moisture trapped against your skin during a 90-minute match, followed by bad drying. Leaving your guards in a dark, damp sports bag after a game creates the perfect breeding ground for bacteria and mildew, leading to lingering smells and potential damage to the material. Proper drying is just as important as cleaning for both hygiene and how long your guards last.
Effective Drying Techniques
- Get Them Out Immediately: As soon as you finish playing, take your Shinster Elite Shields out of your kit bag. Don't let them sit in that damp, enclosed space.
- Air Dry: Let your guards air dry for 4-6 hours at room temperature in a well-ventilated area. This could be on a drying rack, a windowsill (out of direct sun), or just on a clean surface in a room with good air circulation.
- Avoid Heat Sources: Never put your shin guards on radiators, near heating vents, or in direct sunlight. High heat exposure is really bad: it will warp the polypropylene shell, mess up the EVA foam, and bleach or fade your custom-printed image. This damage is often irreversible.
- Check for Dryness: Before storing, make sure your guards are completely dry, both the shell and the foam backing. Any leftover moisture can lead to mildew and bad smells.
Combating Persistent Odour
If you notice a lingering smell even after proper cleaning and drying, try these extra steps:
- Sock Hygiene: Remember that your grip socks or sock sleeves, which hold your slip-in guards in place, also contribute a lot to odour. You should wash these as often as your uniform. A clean sock against a clean guard is essential.
- Baking Soda (Be Careful): For really stubborn smells, a light dusting of baking soda on the foam backing (after cleaning and drying) can help absorb odours. Leave it for a few hours, then brush it all off completely before you use them. Use it sparingly and make sure no residue is left.
Keeping Your Personal Touch: Print Quality and Long-Term Storage
Your custom print shows off your personality and style. How vibrant and sharp this print stays depends not only on our handcrafted process but also on the quality of your original image and how well you continue to care for it. When you're designing your Shinster guards, always upload a photo that's at least 1000 pixels on the long side; 1500 pixels is perfect for maximum sharpness and detail. A high-resolution source file ensures your custom design truly pops.
Optimal Storage Practices
Once your Shinster Elite Shields are totally clean and completely dry, proper storage is the final step to making sure they last and keeping your custom print looking great:
- Cool, Dry Environment: Store your equipment in a cool, dry place, away from direct sunlight or big temperature changes. A closet shelf, a dedicated gear bag (once dry), or a locker are all good options.
- Avoid Compression: Don't store your shin guards under heavy items that could squeeze or warp the polypropylene shell or the EVA foam. Constant pressure can permanently change their shape and how well they protect you.
- Ventilation: Even in storage, good air circulation is helpful. Don't seal them in airtight containers for long periods, as this can trap any leftover moisture and encourage mildew.
- Seasonal Storage: If you're putting your guards away for the off-season, make sure they are super clean and dry. Storing dirty or damp guards for months will definitely lead to permanent damage and awful smells.
By consistently avoiding washing machines, extreme temperatures, and neglecting quick post-match care, your custom design will stay vibrant, and your Shinster Elite Shields will keep protecting you all season long, and beyond.
More Shinster Guides
Frequently Asked Questions
While some disinfectant sprays are okay, it's generally best to stick to mild soap and water. Harsh chemicals in some sprays could potentially break down the materials or affect your custom print over time. If you do use a spray, pick one specifically for athletic equipment and test it on a hidden spot first.

Design your own pair
Upload a photo, pick your size and we handcraft your shin guards in Europe.
Shinster Elite Shield — €49.99


